Pulse datalogger with counting and binary inputs

Dual channel data logger is designed for counting of pulses and for data logging of time events from binary signal.

Further product information.

record of pulses from water meter, gas meter, electrometer, flow meter, revolution counter
time event record from binary signal (e.g. door opening/closing .. )
production monitoring
long term field measurement

counter reading is possible to display in real value, range of the LCD display is 19999, after exceeding of displayable value only lowest places are displayed
two modes are enabled: after counting of maximum value counter stops or overflows and counts again, counter reset enabled from the PC
in the record is possible to indicate counter state or counter state increment between logging intervals
record from binary input contains date and time (resolution of 1 s) when change of input logic level appeared and its logic state
record from binary input can be disabled
it is possible from the PC to assign both logic states of binary input a description, which is displayed on the record - on the LCD logic states are always displayed as ON ( contact closed) and OFF (contact opened)
variability of connection to the computer - USB, RS232, Ethernet, GSM modem
permanent connection to the PC enabled, data is possible to download even during logging
dual level alarm is enabled for counting input, alarm is indicated by blinking of the value on the LCD display
low power consumption from battery, easy replacement of the battery
logging start/stop is enabled: at certain time and date programmed from computer, by external signal connected to binary input or by delivered magnet
also special logging mode is enabled, when logging runs only, if counter value is out of adjusted alarm limits
input pulse signal is recalculated and displayed in real measured physical units by means of the PC software
extremely low consumption from the battery, indication of remaining battery life, easy battery replacement
robust watertight case, easy installation, locking enabled
each logger is possible to describe with text of maximum 32 characters
each channel is possible to describe with text of maximum 16 characters
password protection is enabled to prevent unauthorized manipulation with logger

Your request

Did you fail to find the information you were looking for, or do you have a specific request concerning this particular product?
Fill in our request form and we will contact you as soon as possible.