Language select

Česky English Slovensky

LE-580FX

Pocket size LAN analyzer powered and connected through to PC USB interface. Offers full duplex analysis on Ethernet 10/100 Base-T both on a traffic and protocol level. In addition provides packet generation capabilities at specific transmitting speed and QoS measurements.

E-mail link to a friend

Further product information.

LineEye LE-580FX is LAN analyzer used by connecting to USB2.0 of PC. With TAP mode, you can capture full duplex data on 10/ 100Base-TX and transmit to PC via USB2.0 (480Mbps). In Packet Generator mode, you can generate test packets max. at 100Mbps line rate.

LE-580FX can be used for:

  • Checking LAN protocols and data in the test devices
  • Checking and analysis the traffic
  • Providing statistic information, such as error rate etc
  • Generate test packets for network test
  • Measuring QoS, such as latency etc
  • Studying network communication protocols
Capture LAN Packets Via USB:

TAP mode captures full-duplex data on PortA or PortB, and transmits to PC via USB2.0 port. Captured data can be displayed on PC. Time Stamp is added to every receiving data frame with 1us resolution. LE-580FX is not only able to capture all frames but also filter the specific packets. Filtering conditions can be set by MAC/IP address, protocols (ARP/IP/ICMP/IGMP/TCP/UDP/use defined), and specifying IP address/port/packet size etc.

a

Protocol Analysis Software - Ethereal:

Captured data can be used with free of charge LAN analysis software eg. Ethereal. LE-580FX works as network adaptor.

a

Generate Packets at 100Mbps Line Speed and measure QoS:

LE-580FX can generates test packets at your specified transmitting speed. Tell you the processing ability of the network devices and how they work at the high traffic. Test packets are generated in the FPGA, so it will not be affected by the performance of PC.

User can define 2-7 layer of data frames up to 128, and transmit them continuously or selected times. Add errors (CRC etc.) and VLAN/MPLS tags. Captured packets can be used as transmitting packets. Additionally user can calculate statistic information and display the results in trend charts and graphs for each port to know the quality of network.

LE-580FX does not only calculate numbers of data, but also calculate by each error, packet size, collision type and filtering.

LE-580FX is able to perform the network Qos Test by transmitting test data from PortA(B) to PortB(A). Test packet lines can be set up to 8, includes VLAN VID (0-4095) and CoS (0-7) Parameter. QoS test tells you the packet loss and latency etc.. 

a   

Request

Your request

Did you fail to find the information you were looking for, or do you have a specific request concerning this particular product?
Fill in our request form and we will contact you as soon as possible.







Nová položka
Lineeye

Datasheet

  • (1 MB)