Datalogger DT80M

Further product information.

• Ultra low-power design
• Integrated cellular modem
• Automatic data transfer to email or FTP
• 1 serial 'smart sensor' port
• Up to 15 Analog (± 30V) sensor inputs
• Expandable to 300 analog points
• 12 flexible digital channels
• Modbus for SCADA connection
• SDI-12 (multiple networks)

- Analog channels

• 5 analog input channels
• Each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs.
• Maximum sample speed: 25Hz
• Effective resolution: 18 bits
• Inter-Channel Isolation: 100V (relay switching)
• Analog Section Isolation: 100V (opto-isolated)
• Input impedance: >100MΩ, 100KΩ (30v range)

- Analog Sensors

• Thermocouples
• RTDs
• Thermistors
• Monolithic Temperature Sensors
• Strain Gauge and Bridge Sensors
• 4-20mA Current Loop

- Digital Channels

• 8 bi-directional channels
• 8 counters shared with digital inputs.
• Size: 32 bit
• Max count rate: 10 Hz
• 4 high speed inputs or 2 phase encoder (quadrature) inputs
• Size: 32 bit
• Max count rate: 100 kHz

- Serial Channels

• SDI-12
• 4 SDI-12 input shared with digital channels

- Scheduling of Data Acquisition

- Data Storage

• Internal Store capacity: 128MB = approx 10,000,000 data points
• Removable USB store device(optional accessory)

- Communication Interfaces

• Ethernet Port
• USB Port
• Serial Sensor Port

- Network (TCP/IP) Services

• Command Interface
• Web Server
• FTP Server
• FTP Client
• Modbus Server (Slave)
• Modbus Client (Master)
• Email Client
• DDNS Client

- Inbuilt Modem

• Alarms: Send email or SMS messages
• Data: Send data to an email address or FTP server
• Remote access: Connect to dEX or Command interface

- Host Software:

• DPlot - DPlot is Windows based graph software that allows you to easily create trend and other chart types from both CSV and DBD format data files. A single user copy of this software is bundled with each logger. For more information on DPlot visit the DPlot website.
• 
  dEX - Browser based software that allows you to configure the logger, view data as mimics/charts/lists and download data. You don't need to download or install it in your computer as it is part of the logger's firmware. To access dEX via a USB connection make sure you install the DtUSB driver first.
• DeTransfer - Pre-requisite: Knowledge of dataTaker programming language. Text based terminal program for programming and viewing data from any dataTaker data logger. Requires Windows XP or later.
• 
  DeLoad - Allows a pre-written configuration to be loaded onto any dataTaker logger, and provides a means of collecting data which can then be saved or emailed. Requires Windows XP or later.

Request

---